Wort Chillers

 

25′ Copper Immersion Chiller

 

The coils have been specially positioned to be at the top of your wort, where the majority of the heat will be. This results in a faster cooling time over chillers with lower coils.

25′ of 3/8” copper tubing. 8′ of vinyl tubing attached to both the in and the out with a female garden hose fitting on the in side. Perfect for a kitchen environment where the sink is close by. Equipped with new proprietary water turbulation technology making it more water efficient.

 

 

50′ Copper Immersion Chiller (for 10 gallon batches)

 

The coils have been specially positioned to be at the top of your wort, where the majority of the heat will be. This results in a faster cooling time over chillers with lower coils.

50′ of 1/2” copper tubing with brass connection fittings for garden hoses. Use with converted kegs and most kettles used for 10 gallon batches.

The measurements are: Approx. 10″ diameter, 13″ to the top coil, 24″ to the bend to go over the lip of the kettle.

 

Blichmann Therminator Plate Chiller

 

The Therminator™ is the fastest way to chill your wort to yeast pitching temperature and get your fermentation off to a quick, bacteria-free start.

 

 

 

 

  • All 316 stainless steel plates and fittings.
  • Chill like the pro’s – Identical to commercial brewery chillers.
  • Brazed together with pure copper in an oxygen free furnace- no potential leaks like a gasketed unit!
  • Chill 10 gal in 5 min to 68oF using 58oF cooling water at 5 gpm.
  • Great for southern climates! (see notes on “Performance” page)
  • Ultra compact (7.5″ W, 4″ D, 3″ H)
  • Super low restriction – ideal for gravity feed
  • Easy to clean and sanitize – small enough to boil! *
  • Garden hose thread connections on water side – no extra adapters to buy!
  • 1/2″ male NPT fittings on wort side mates up with virtually all common hose connector types. Easier to sanitize than female fittings!
  • Saves water – lowest water consumption on the market!
  • Comes with heavy gauge stainless mounting bracket

Blichmann Engineering is committed to continuous product improvement, so design details may change from the photo’s shown.