Grainfather Glycol Chiller Adapter (GCA)
The Glycol Chiller Adapter works in a similar way to the GF30 Conical Fermenter but instead of the built-in cooling sleeve and heating element, it uses a stainless-steel cooling coil and a heating pad to control the temperature of almost any fermenter.
The cooling coil is connected to the Glycol Chiller and immersed in the fermenter. The heating pad is attached to the side of the fermenter using hook and loop tape. A temperature probe is also attached to the fermenter and the GCA will then regulate the cooling, or heating, as required.
The GCA connects to the Grainfather App so you can control your fermentation temperature on the go.
Included in the GCA Kit:
GCA Controller
Heating Pad (12V 30W)
5m Cooling Coil
Hose
Rubber Bung
Velcro Hook Strip x 4INSTRUCTIONS
Hose Clamps x 2
Rubber Bung Stoppers x 4
VIDEO TO CONNECT YOUR GRAINFATHER GLYCOL CHILLER ADAPTER (GCA)
The Glycol Chiller Adapter works in a similar way to the GF30 Conical Fermenter but instead of the built-in cooling sleeve and heating element, it uses a stainless-steel cooling coil and a heating pad to control the temperature of almost any fermenter.
The cooling coil is connected to the Glycol Chiller and immersed in the fermenter. The heating pad is attached to the side of the fermenter using hook and loop tape. A temperature probe is also attached to the fermenter and the GCA will then regulate the cooling, or heating, as required.
The GCA connects to the Grainfather App so you can control your fermentation temperature on the go.
Included in the GCA Kit:
GCA Controller
Heating Pad (12V 30W)
5m Cooling Coil
Hose
Rubber Bung
Velcro Hook Strip x 4INSTRUCTIONS
Hose Clamps x 2
Rubber Bung Stoppers x 4
VIDEO TO CONNECT YOUR GRAINFATHER GLYCOL CHILLER ADAPTER (GCA)
The Glycol Chiller Adapter works in a similar way to the GF30 Conical Fermenter but instead of the built-in cooling sleeve and heating element, it uses a stainless-steel cooling coil and a heating pad to control the temperature of almost any fermenter.
The cooling coil is connected to the Glycol Chiller and immersed in the fermenter. The heating pad is attached to the side of the fermenter using hook and loop tape. A temperature probe is also attached to the fermenter and the GCA will then regulate the cooling, or heating, as required.
The GCA connects to the Grainfather App so you can control your fermentation temperature on the go.
Included in the GCA Kit:
GCA Controller
Heating Pad (12V 30W)
5m Cooling Coil
Hose
Rubber Bung
Velcro Hook Strip x 4INSTRUCTIONS
Hose Clamps x 2
Rubber Bung Stoppers x 4
VIDEO TO CONNECT YOUR GRAINFATHER GLYCOL CHILLER ADAPTER (GCA)
